Lenovo 7D1J Скачать руководство пользователя страница 176

Страница: 176 / 246

Table 4. Events organized by severity (continued)

Event ID

Message String

Severity

FQXSFMA0001I

DIMM [arg1] Disable has been recovered. [arg2]

Informational

FQXSFMA0002I

The uncorrectable memory error state has been cleared.

Informational

FQXSFMA0006I

[arg1] DIMM [arg2] has been detected, the DIMM serial number is
[arg3].

Informational

FQXSFMA0007I

[arg1] DIMM number [arg2] has been replaced. [arg3]

Informational

FQXSFMA0008I

DIMM [arg1] POST memory test failure has been recovered. [arg2]

Informational

FQXSFMA0009I

Invalid memory configuration for Mirror Mode has been recovered.
[arg1]

Informational

FQXSFMA0010I

Invalid memory configuration for Sparing Mode has been recovered.
[arg1]

Informational

FQXSFMA0011I

Memory population change detected. [arg1]

Informational

FQXSFMA0012I

The PFA of DIMM [arg1] has been deasserted.

Informational

FQXSFMA0013I

Mirror Fail-over complete. DIMM [arg1] has failed over to to the
mirrored copy. [arg2]

Informational

FQXSFMA0014I

Memory spare copy initiated. [arg1]

Informational

FQXSFMA0015I

Memory spare copy has completed successfully. [arg1]

Informational

FQXSFMA0026I

DIMM [arg1] Self-healing, attempt post package repair (PPR) at Rank
[arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6]. [arg7]

Informational

FQXSFMA0029I

The PFA of DIMM [arg1] has been deasserted after applying PPR for
this DIMM. [arg2]

Informational

FQXSFMA0046I

DIMM [arg1] is disabled because it is Intel Optane PMEM that is not
supported on current platform

Informational

FQXSFPU0020I

The UEFI firmware image capsule signature is invalid.

Informational

FQXSFPU0021I

The TPM physical presence state has been cleared.

Informational

FQXSFPU0023I

Secure Boot Image Verification Failure has been cleared as no failure
in this round boot.

Informational

FQXSFPU4034I

TPM Firmware recovery is finished, rebooting system to take effect.

Informational

FQXSFPU4038I

TPM Firmware recovery successful.

Informational

FQXSFPU4041I

TPM Firmware update is in progress. Please DO NOT power off or
reset system.

Informational

FQXSFPU4042I

TPM Firmware update is finished, rebooting system to take effect.

Informational

FQXSFPU4044I

The current TPM firmware version could not support TPM version
toggling.

Informational

FQXSFPU4046I

TPM Firmware will be updated from TPM1.2 to TPM2.0.

Informational

FQXSFPU4047I

TPM Firmware will be updated from TPM2.0 to TPM1.2.

Informational

FQXSFPU4049I

TPM Firmware update successful.

Informational

FQXSFPU4059I

User requested to skip freezing lock of AHCI-attached SATA drives.
System UEFI accepted the request and will execute priot to OS boot.

Informational

172

ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference

Содержание 7D1J























































































































































































































































Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды

Lenovo 7D1J, Справочник

Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды