Lenovo 7D1J Скачать руководство пользователя страница 211

Страница: 211 / 246

User Action:

Complete the following steps:

1. Reboot the system.

2. If the problem persists, collect Service Data logs.

3. Contact Lenovo Support.

•

FQXSFPU4056M: TPM card is changed, need install back the original TPM card which shipped with

the system.

Severity: Error

User Action:

Complete the following steps:

1. Re-install the original TPM card that shipped with the system.

2. Reboot the system.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU4057I: Secure boot variable is being accessed with an unauthorized password, reset the

system immediately to recover.

Severity: Warning

User Action:

Information only; no action is required.

•

FQXSFPU4058I: Secure Boot Setting is changed from enabled to disabled

Severity: Warning

User Action:

Information only; no action is required.

•

FQXSFPU4059I: User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI

accepted the request and will execute priot to OS boot.

Severity: Info

User Action:

Complete the following steps:

1. Change SystemOobCustom.SkipAhciFreezeLock from Disable to Enable using OneCLI tool.

2. Reboot the system into OS.

•

FQXSFPU4060I: Skipped freezing lock of AHCI-attached SATA drives.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4061I: Restored default locking behavior of AHCI-attached SATA drives.

Severity: Info

User Action:

Information only; no action is required.

Chapter 4

UEFI events

207

Содержание 7D1J























































































































































































































































Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды

Lenovo 7D1J, Справочник

Результаты поиска

Содержание 7D1J

Отзывы:

Похожие инструкции для 7D1J

Бренды по названию

Популярные бренды