diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
188
/
228
•
•
•
•
•
•
•
Master Slots
Each master slot is assigned by touching the arrow (at the top right of the slot) and choosing an option.
The following functions are supported:
Meter - PGM x
- output metering for a programme bus.
Meter - Rec
- output metering for the record bus.
Meter - CR
- output metering for the control room monitoring.
Meter - HP
- output metering for the headphone monitoring.
User Keys
- 8 programmable user keys (requires configuration).
Timers
- two count-up/count-down timers.
Video
- four video previews (requires configuration).
Output Metering
There are no user options for the output meters and so both peak and momentary loudness bargraphs are always
displayed. The numerical readout shows the integrated loudness measurement (in
LUFS).
For each of the main bus outputs, the metering point comes after all processing including the fader. For the monitoring
outputs, the metering point comes after the monitor source selector and before the volume (including mute/
dim).
For more information about the metering scales and characteristics, see diamond - Metering.
User Keys
The 8 user keys are defined by the configuration. In the standard configuration, nothing is programmed and so the
functions must be configured using VisTool Editor and the ON-AIR Designer.
Timers
Each timer has two modes of operation: count-up or count-down, and can be triggered either automatically or manually.
The full operation is described later in Timer Operation.
