diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
157
/
228
•
•
If more than four VCAs are defined (in the configuration), then press
5-8
to access the second page.
2. Press
the fader strip soft keys to toggle the assignments (on/off).
3.
When
you have finished editing the assignments, deselect
VCA
(on the central controls module).
The fader strip controls return to their default functions.
On the GUI...
1.
Open the 'Source Parameter' dialog box by pressing a fader strip
Access
key, and choose
the Input page.
2. Touch
the button under 'VCA Group' to open the 'VCA assign' overlay.
3. Touch
a button to toggle the assignments (on/off).
Yellow = assigned (on).
Grey = not assigned (off).
4. Touch
X
to close the 'VCA Assign' overlay.
The button under 'VCA Group' updates to show either the name of the VCA group or "No VCA" (if there is no group
assigned).
VCA Group Operation
The VCA grouping applies to the fader level and channel on/off status.
In Lawo radio systems, VCA groups use non-moving faders. This means that when you move a VCA group, its member
faders remain stationary even though their level is changing.
If you press the
channel
ON
key
on the VCA group, then the
channel
ON
keys
on the group members follow accordingly.
This allows you to close a VCA group and adjust its mix levels while the group is off-
air.
