LAWO diamond, Руководство пользователя

Страница: 208 / 228

diamond - User Manual
Version: 8.0.0/1 Exported on: 24 October, 2023 208 / 228
•
•
•
•
•
•
•
•
•
•
•
'Settings -> Surface'
This tab includes five options that affect the displays on the surface or the GUI layout.
The first two options change what is shown in the fader strip 'Source Display'. Each option can be turned on or off
independently.
Show Icons in Fader Displays - shows the icon assigned to the source.
Show Userlabels - shows the two user label lines.
The next option changes the behavior of the ambient light detectors on the central controls module:
Surface Ambient Light Sensor (on) = surface brightness adjusts automatically according to the ambient light levels.
Surface Ambient Light Sensor (off) = surface brightness remains the same.
The last two options can be used to change the layout of the 'Channel Strip' page so that it matches the surface hardware.
Each option can be turned on or off
independently.
Swap Slots - swaps the position of the channel strips from left to right. This option should be enabled if the Fader
module is fitted to the right of the central controls.
Combo Module - changes the layout from 4 channel 4 master slots to 6 channel 2 master slots. This
option should be enabled if the surface is fitted with a Combo module.
'Settings -> Timer'
This tab defines the trigger for each timer when Auto mode is enabled. The option can be set independently for Timer 1 and
Timer 2. In each case, there are two possibilities:
Mic Only = the timer counts only when a Mic source fader is open (applies to all Mic sources).
All Faders = the timer counts when any fader is open (applies to all faders).
Note that this option only becomes active once Auto mode is enabled. If Auto is turned off, then the timer operation is
manual.
'Settings -> Top Bar'
This tab controls what is visible in the top bar (of the GUI). Each option can be turned on or off independently.
Show Clock - shows the system time and date.
Show Mic timer - shows the mic timer. This lights in red and counts up from 00:00 once a Mic source fader is open.
Show Notifications - shows the status of any system notifications.