diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
48
/
228
4.7 diamond - MF Key Labels
By default, the control surface ships with the correct MF key labels for the standard configuration. The labels for each
control surface module can be viewed here.
If you change the MF key functionality, then you will need to exchange the foil-printed labels. Printed sheets with the most
common labels are included with each frame.
Ordering Custom Labels
If you wish to order some custom labels, then edit the "diamond_project_key_labels.xlsx" spreadsheet and attach it in an
email to [email protected].
Please remember to add the Customer name, Project name and shipping details.
The spreadsheet can be opened or downloaded using the link below:
Exchanging the MF Key Labels
1.
First
remove the button cap.
It helps to use a small screwdriver to lift up the button cap (as the caps are recessed). However, you must take care not to
scratch the surface.
2.
Insert
the foil plate between the button body and the transparent button cap.
3.
Fasten
the button cap back onto the button body by pressing it!
