diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
125
/
228
•
•
◦
◦
•
◦
◦
◦
◦
◦
•
•
On the GUI...
The parameters for all five bands are shown simultaneously, and there is a visualization that shows the overall frequency
response.
The
EQ
button acts as the master on/off for the complete section: 3-band parametric EQ + 2-band filters.
The EQ curve provides an easy way to check if the processing is turned on or off:
Curve (filled) = EQ on.
Curve (not filled)
=
EQ off.
To adjust each of the five bands, you can either touch and drag a numbered point on the EQ curve, or touch and drag
the values inside the parameter boxes:
Band 1 = Low Cut (High Pass) Filter or Low Shelf.
Band 2 = Low band Parametric EQ.
Band 3 = Mid band Parametric EQ.
Band 4 = High band Parametric EQ.
Band 5 = High Cut (Low Pass) Filter or High Shelf.
For the two filter bands, use the
Response
parameter to set the EQ type.
The meters show the levels at the input and output of the EQ section.
