diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
187
/
228
•
•
•
Processing
This area shows the on/off status of each DSP module: unlit = off, lit = on. The icons use the Lawo LUX color-coding as
follows:
High Pass Filter EQ
Compressor De-Esser
Expander
Gate
Limiter
Delay
To turn a module on/off, or adjust its settings, press a fader strip
Access
key to open the Source Parameters and then
choose the relevant page.
Bus Routing
This area shows the assignments to the 8 summing buses (defined in the standard configuration). The icons are color-
coded to indicate the current status:
Unlit = source is not assigned (off).
Yellow = source is assigned (post-fader).
Red = source is assigned (pre-fader).
To change the bus assignments, press
Bus
and a page number from the central controls, or press a fader strip
Access
key
to open the Source Parameters.
For more information on editing the bus assignments, see diamond - Bus Assign.
Source Name & Userlabels
This area shows the source name (in large text) and user label lines (in small text).
The text can be edited by the user labels editor
.
In each case, up to 8 characters are supported.
