diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
175
/
228
Rotary Central Extension - Controls
Source Parameter Control
If the console is fitted with Fader
Extension modules,
then it is possible to adjust source parameters directly from the fader
strip. This allows users to adjust parameters, such as EQ or Dynamics, for more than one source at a time.
The parameters are assigned globally across the console using "page" keys that are defined by the configuration. Any MF
key (on the surface or GUI) can be configured as a page key; the mapping of parameters within each page is system-
defined. This means that the number and location of the page keys may vary, while the operation of the Fader Extension
controls is always the same (regardless of the configuration).
In the standard configuration, the page keys are programmed onto the
Key Extension
or
Combo Extension
module.
DSP parameters can be protected so that only certain users can make changes. If this is the case, then you must be logged
in (with DSP parameter rights) in order to open the relevant pages. The rights can be edited by an administrator of the user
access rights system.
