diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
57
/
228
•
•
4.
When the installation is complete, the following window appears.
5.
It is recommended to leave the default "Run" options selected and click on
Finish
.
This launches the ON-AIR Designer and SoP Explorer applications. In both cases, the next step is to configure a valid
network connection to the Lawo system.
Getting Connected
To establish a network connection to the Lawo system, you will need to configure the network settings for your PC's LAN
port.
The
IP Address
must be unique and set within the same range as that of the port you are connecting to (i.e. the first three
fields must match).
You can check the current network settings for Power Core on its front panel display, and those for diamond from the
surface displays during boot-up.
The default IP addresses are:
Power Core = 192.168.101.240
diamond = 192.168.101.241
The
Subnet Mask
should be identical to that of the port you are connecting to.
The default subnet mask = 255.255.255.0
A
Default Gateway
setting is required if data packets are to be
redirected. For
example, if the computer is connected via a
network switch with Layer 3 routing capability.
If redirection is not required, then the Default Gateway can be left blank.
To test the connection,
open a web browser application and enter the
system’s
IP address into the URL field. e.g.
192.168.101.240 - if the connection is successful, the Web UI "Login" screen appears.
