diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
149
/
228
PFL Monitoring
In the standard configuration, the PFL output is switched automatically to the headphones (HP) whenever a PFL is active.
The previous monitor source is re-instated once all active PFLs are cleared.
If
PFL
is selected (as a Contol Room monitor source), then PFL is switched to both outputs: HP and
CR.
The
Mon PFL
output can be connected to a separate PFL speaker, either by editing the default audio connections (using
ON-AIR Designer) or by making a connection from the 'Routing' page (on the GUI).
You can use the PFL master controls (on the Central or Combo module) to adjust the master PFL level or
Clear
all active
PFLs.
The images below show the functionality of the Central Rotary Controls defined by the standard
configuration.
Central Rotary Controls - Central Module
Central Rotary Controls - Combo Module
