diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
91
/
228
•
•
•
•
•
•
•
•
ON (Channel On/Off)
This key turns the channel on or off.
The
ON
key has two possible states. The colors used can be modified by the ON-AIR Designer. The following colors are
used in the standard configuration:
Dim white = channel off.
Full red = channel on.
In the standard configuration, the channel "on" state is conditional on the fader position. This allows you to open and close
a fader automatically as follows:
To quickly turn on a channel, press the
ON
key - it lights in red and the fader opens to 0dB.
To quickly turn off a channel, press the
ON
key again - the light goes out and the fader closes.
To fade the level in or out, move the fader - the channel
ON
key indicates the on/off status.
PFL (Pre-Fader Listen)
This key assigns the source to the PFL bus. It can be used to listen to a source before opening its fader.
The
PFL
key has three possible states. The colors used can be modified by the ON-AIR Designer. The following colors are
used in the standard configuration:
Dim white = PFL off.
Full green = PFL on and fader closed (PFL active).
Dim green = PFL on and fader open (PFL prepare).
"PFL prepare" occurs if you select
PFL
on an open fader. Nothing happens until you close the fader; once the fader is
closed,
PFL
becomes
active.
In the standard configuration, the PFL bus is switched to the headphone (HP) monitoring whenever a PFL is active. The
previous monitor source is re-instated once all active PFLs are cleared.
The PFL system is described in more detail later.
See
PFL.
