Label Neptis SMP, Руководство по установке

Страница: 43 / 60

20) INFORMATION AND EVENTS MEMORY
N-DSEL digital programmer allows displaying information on automation and accessing to events memory, where fault errors are stored.
After displaying the automatic door work program, press button for 5” to enter the information area (Diagram 2).
The buttons inside the information area are used as follows:
Ÿ
ν button allows forwarding to the following information or event in events memory.
Ÿ
^ F2 button allows forwarding to the following information or event in events memory.
Ÿ
F3 button is only used with two-leaf swing door and the symbol on the top right side of display shows M if Master operator information is
displayed, or S if Slave operator is involved.
Every touch on F3 button allows shifting from M to S and vice versa.
In case of single-leaf automation, letter M is shown on the top right side of display.
Ÿ
F1 button allows shifting to events memory to display error messages and return to information area by pressing it again
Ÿ
EXIT button allows returning to main view of door work program.
5”
MEMORY
EVENTS
ERROR
I
1
I
2
I
3
I
4
I
5
I
6
F2 F2 F2 F2 F2
F1
ERROR
F1
ERROR
F1
ERROR
F1
ERROR
F1
ERROR
F1
INFORMATION
AREA
INFO
E
1
E
2
E
3
E
4
E
5
F2 F2 F2 F2
F1
INFO
F1
INFO
F1
INFO
F1
INFO
F1
I 1, I 2, ... = INFORMATION AREA
E 1, E 2, ... = MEMORY EVENTS
The diagram shows the path for access to information and events memory display; texts in figures relate to the memory cells that appear on
the display in the left side when accessing the display of information or errors.
MEMORY
EVENTS
INFORMATION
AREA
MEMORY
EVENTS
INFORMATION
AREA
MEMORY
EVENTS
INFORMATION
AREA
MEMORY
EVENTS
INFORMATION
AREA
MEMORY
EVENTS
43
DIAGRAM 2