Label Neptis SMP, Руководство по установке

Страница: 14 / 60

6.5) EXTB-Z TAPERED PIN
Use the EXTB-Z tapered pin if a larger distance is required between the operator and the arm in comparison to the standard tapered pin.
For the assembly dimensions follow the technical drawings in par. 5.
For the assembly, follow the steps shown in the following figures:
insert the M8 X 90 screw in the tapered pin (A), insert the arm in the closed shell (B), insert the tapered pin in the arm (C) and tighten
the two M6 X 20 screws (D).
6.6) EXTENSION FOR EXTC-Z TAPERED PIN
Use the EXTC-Z extension if a larger distance is required between the operator and the arm in comparison to what can be obtained
using the standard and EXTB-Z tapered pins.
Couple the EXTC-Z extension to the standard or EXTB-Z tapered pin (depending on the distance to be reached, see the technical
drawings in par. 5).
For the assembly, follow the steps shown in the following figures:
couple the EXTC-Z extension with the tapered pin and insert the central screw (E), tighten the two M6 X 65 side screws (F), insert the
extension in the arm and tighten the two M6 X 20 screws (G).
14
A B C D
E F G