Label Neptis SMP, Руководство по установке

Страница: 30 / 60

16) GENERAL PROGRAMMING MENU
To enter the general programming menu while the automatic door operating program is shown on display, keep button pressed for
about 5 seconds.
The programming menu consists of different sub-menus divided by subject (Diagram 1).
Select the section you want to have access to by using F1 button >> .
The menu icon selected is highlighted and the section title is shown on display top side.
To enter the selected sub-menu, give a quick pulse on ENTER button.
To exit the general programming menu and return to the operating program view, press EXIT button.
F1
»
F1
»
F1
»
F1
»
5”
UNUSED
UNUSED
F1
»
F1
»
F1
»
Ÿ
Refer to par. 14.4 when entering the initial set-up section.
Ÿ
Refer to par.14.3 when entering the serial communication setups for single-leaf door; see para. 26.2 for two-leaf
swing door.
Ÿ
For the other sub-menus, refer to the following paragraph on the section you have had access to
“INITIAL SET-UP”
SECTION
“FUNCTIONS AND REGULATIONS”
SECTION
“LANGUAGE”
SECTION
“SERIAL
COMMUNICATION
SET-UP”
SECTION
“PASSWORD
MANAGEMENT”
SECTION
“MAINTENANCE ”
SECTION
ENTER
EXIT EXIT EXIT EXIT
ENTER ENTER
EXIT EXIT EXIT EXIT
ENTER ENTER ENTER
30
DIAGRAM 1