KYOWA WGA-910A Series, Инструкция по эксплуатации

Страница: 89 / 150

85
The measuring condition No. cannot be changed when other than selected signals are input.
6-5. INITIAL SETTING
6-5-1. Meas. Select Signal (Measuring Condition Selecting Signal)
Sets a signal for selecting a measuring condition number.
・ For key operation: Sets the measuring condition No. by pressing key on the “ Meas. Cond. Setting ”
window.
・ For control input: Sets the measuring condition No. with the combination of ON/OFF setting from the
“Measuring condition select 0” to “Measuring condition select 3.”
・ For communication: Sets the measuring condition No. with the RS command.
<Setting Range>
Key operation, Control input, Command
<How to operate>
1) Press the key on the “ Measuring ” window.
2) Press the key on the “ Setting (1/2) ” window.
3) Press the key on the “ Setting (2/2) ” window.
4) Press the key on the “ Initial Setting ” window.
5) Press the target key and key for the registration.
set.
The operations of WGA-910A and
external device are checked.
System
Self-Check
Operation Check
Next 1 / 2
Initial Setting
The signal to select the num-
ber of measurement condition
is set.
Return Measure
Meas.Select Signal
Key Operation
Self-check of WGA-910A is con-
ducted.The program version and
serial No.are displayed.
The initial sets on system are
Setting
'Meas.Select Signal'
'System', 'Self/Operation
Measure
Initial Setting
Option Setting
Previous 2 / 2
Check'and 'SD Card'
'Communication', 'BCD Output',
'DA Output'and 'CC-Link'
are set.
NOTE