KYOWA WGA-910A Series, Инструкция по эксплуатации

Страница: 13 / 150

9
2. CONTROLS AND FUNCTIONS
2-1. FRONT PANEL
2-1-1. Measuring Window (Number)
1) Hold key Manually starts a detection and holding.
2) Switch key Display changes in order from “Number” - “Zoom in number” - “Waveform”
by pressing the key.
3) [Detecting] lamp
[Holding] lamp
[Detecting] lamp lights up in white during detection and [ Holding] lamp
lights up in white during holding respectively.
4) Comparator status lamp When turning ON the comparator outputs, the [ HH] and [ HI] light up in red,
OK lights up in white, and [ LO] and [ LL] lights up in yellow.
5) Measured value Displays a measured value with unit.
6) Compared value setting key Displays the “Compared value” setting window of comparator.
7) Power LED Lights up in green when the power is ON.
Lights up in orange while updating the firmware.
8) ZERO key Conducts digital zero to set the display of the measured value to 0 (or
additional value).
9) Set key Displays the setting menu window.
10) Measuring condition No. Displays the current measuring condition setting No.
11) Operation mode Displays “operation mode” of “measuring function.”
12) Compared value Displays “Compared value” of comparators.
13) SD cap Pull the rubber SD cap and insert a SD card to a slot.
kN
LL LO HI HH OK
Switch
- 150.00 - 999.99
HH
999.99
HI
500.00
LO LL
Hold Zero Set
Detecting
Time Peak
Measure 1
Holding
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)