KYOWA WGA-910A Series, Инструкция по эксплуатации

Страница: 17 / 150

13
2-1-5. Measuring Window (Number View Dual Display for [Block Peak-Bottom] and [Time Peak-Bottom])
1) Hold key Manually starts a detection and holding.
2) Switch key Display changes in order from “Number View Dual Display” - “Zoom In
Number View Dual Display” - “Waveform View Dual Display” by pressing the
Switch key.
3) [ Detecting ] lamp [Holding]
lamp
[ Detecting ] lamp lights up in white during detection and [ Holding ] lamp lights
up in white during holding respectively.
4) Comparator status lamp for
peak value Based on the detecting peak value, when turning ON the comparator outputs,
the [
HI-1 ] light up in red, [ OK ] lights up in white, and [ LO-1 ] lights up in
yellow.
5) Peak value Displays a peak value with the unit.
6) Comparator status lamp for
bottom value Based on the detecting bottom value, when turning ON the comparator outputs,
the [
HI-1 ] light up in red, [ OK] lights up in white, and [ LO-1 ] lights up in
yellow.
7) Bottom value Displays the bottom value with the unit.
8) ZERO key Conducts digital zero to set the display of the measured value to 0 (or additional
value).
9) Set key Displays the setting window.
10) Operation mode Displays “operation mode” of the “measuring function.”
11) Measuring condition No. Displays the current measuring condition setting No.
12) Compared value setting key
of the peak value
Displays the “HI-1” or “LO-1” window of the peak value.
13) Compared value of the peak
value
Displays the “HI-1” or “LO-1” value of the peak value.
14) Compared value setting key
of the bottom value
Displays the “HI-2” or “LO-2” window of the bottom value.
15) Compared value of the
bottom value
Displays the “HI-2” or “LO-2” value of the bottom value.
kN
-999.99
kN
Bottom
LO OK HI
HI-2 500.00
LO-2 -999.99
Peak
LO OK HI
HI-1 500.00
LO-1
Detecting Holding Block Peak-Bottom Measure 1
Switch Hold Zero Set
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)