Kyocera 358ci, Руководство по эксплуатации

Страница: 561 / 661

10-42
Troubleshooting > Troubleshooting
M
N
*1 When Auto Error Clear is set to [ On ], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-23)
Message Checkpoints Corrective Actions
Reference
Page
Machine failure. ― Internal error has occurred.
Make a note of the error code
displayed on the screen. Call
service. ―
Mailbox tray is full of
paper. Is the acceptable storage
capacity exceeded? Remove the paper. Printing then
resumes. —
Main unit inner tray is
full of paper. Is the acceptable storage
capacity exceeded? Remove the paper. Printing then
resumes. —
Maximum number of
scanned pages. Is the acceptable scanning
count exceeded? Cannot scan pages any more.
Follow the instructions on the
screen. —
Memory is full.
*1
*1 When Auto Error Clear is set to [ On ], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-23)
— The memory is full and the job
cannot be continued. Select
[
Continue ] to print the loaded
pages. The print job cannot be
processed completely. Select
[
Cancel ] to cancel the job.
—
— The process cannot be
performed due to insufficient
memory. If only [
End ] is
available, select [ End ]. The job
will be canceled.
When insufficient memory
occurred frequently, contact
your dealer or service
representative.
—
Multi originals fed at
once. — See the caution attached on the
document processor and check
the originals. If the originals are
jammed, follow the instructions
on the screen to remove the
originals. page 10-80
page 10-82
Message Checkpoints Corrective Actions
Reference
Page
Non-genuine toner
installed. Is the installed toner container
our own brand? We will not be liable for any
damage caused by the use of
third party supplies in this
machine. —