Kurzweil PC3LE, Руководство музыканта

Страница: 351 / 379

Tutorials: Setup Mode
Basics Of Using Riffs
14-49
7. Next, lets change the setup to make riff 1 play not only track 1, but tracks 1-4 of the original song.
Using this method, you could have riff 1 play all the instruments for one part of a song, such as a
verse section, and then use riff 2 to play all the instruments for another part of a song, such as a
chorus section. Use the
Chan/Zone button (to the left of the display) to move to zone 1. The
currently selected zone number can be viewed in the top right corner of the display. Use one of the
more soft buttons at the bottom of the display to find the RIFF1 soft button, then press the RIFF1
soft button. This brings you to the RIFF1 page for zone 1. Use the cursor buttons to select the Src
Track field, then press the minus button (below the Alpha Wheel) to select ALL (see below.) This
setting makes zone 1’s riff (riff 1) play all of the tracks from the song 428 H-Fact Sng. Try pressing
pad 1 to play riff 1, and you will hear the entire song 428 H-Fact Sng play. Press pad 1 again to
stop the riff before continuing.
How does riff 1 play the entire song? Since each track of the song is assigned to MIDI channels
1 ‐ 4 (in Song mode,) each track is still played by the zone assigned to that MIDI channel. So even
though zone 1’s riff is now playing sequence information from all tracks of the original song,
each track is still played by a separate instrument program on zones 1 ‐ 4.
8. Lastly, lets make riff two play all tracks of the same song, but we will have it play the song from a
different point than riff 1. This is meant to demonstrate how you would set up riffs to play different
sections of a song, though the song
428 H-Fact Sng is only 4 bars long, so it is only useful as an
example in this setup. First, lets change the Stop time for riff 1 so that it doesn’t play the song
section that we will use for riff 2. On the RIFF1 page for zone 1, use the cursor buttons to select the
left most
Stop field (this is the Stop bars field,) then press the minus button twice (below the Alpha
Wheel) to change this field to 3 (see below.) Now when you press and light pad 1, riff 1 will play all
tracks of the song 428 H-Fact Sng , but now it is only a loop of the first 2 bars.