Kurzweil PC3LE, Руководство музыканта

Страница: 316 / 379

14-14
Tutorials: Setup Mode
Assigning Multiple Knobs To Control Volume In Different Zones
7. With Ctrl selected in the DestType field, use the cursor buttons to select the Dest field . In the Dest
field , press 7 and then the Enter button on the alphanumeric pad to choose Volume (see below.)
You can also use the Alpha Wheel or - / + buttons to select a destination in the Dest field.
Knob 1 (labeled Timbre on the front panel) should now control the volume of the bass, which is
on the lower half of the keyboard (if not, review the previous steps.) All other settings on the
Controllers page for Zone 1, Knob 1, should be left at their default values (see above.)
8. Next, lets repeat the steps above for Zone 2, using Knob 2. On the Controllers page, use the Chan/
Zone buttons to the left of the display to select Zone 2. You can view the number of the selected
Zone in the top right corner of screen (see below.)
9. On the Controllers page, use the cursor buttons to select the Controller field. Make sure the LED to
the left of Timbre Knob is lit, if it is not, press the Shift button to the left of the Knobs until that
LED is lit. Next, hold the Enter button on the alphanumeric pad and move the Knob labeled Mod.
This will select Knob 2 for the Controller field (see below.) You can also set the desired controller
in the Controller field by using the Alpha Wheel or - / + buttons.