Kongsberg cJoy OT, Руководство оператора

Страница: 95 / 208

Operating procedures
Enabling thrusters
When a thruster can be enabled for joystick control, it is shown as
Running
and
Ready
on the Thruster view (see Thruster view on page 36) and on the Thruster Enable input
dialog (see Thruster Setup on page 47).
There are generally two criteria for a thruster
Ready
status:
• The individual thruster must be running without faults.
• The individual thruster must be available for joystick control.
Before a thruster can be enabled, it must be
Ready
. If a thruster is enabled and it
subsequently loses its
Ready
status, it is automatically disabled.
The system uses only those thrusters that are enabled for use by the system. The thrusters
can be enabled and disabled using the Thruster Enable input dialog.
Note
Changing from Standby to Joystick mode will automatically enable the thrusters
provided that they are ready within a timeout period of 10 seconds.
To enable a thruster, proceed as follows:
1 Display the Thruster Enable input dialog.
2 Check that the colour of the
Running
and
Ready
fields for the thruster is green.
3
Move the focus to the
Enable
field for the thruster and change the option to
Yes
.
4 If required, repeat steps 2 and 3 for the other thrusters.
5 Press the Enter button.
• The thrusters are enabled.
6 Close the Thruster Enable input dialog.
Disabling thrusters
To disable a thruster, proceed as follows:
1 Display the Thruster Enable input dialog.
2 Move the focus to the
Enable
field for the required thruster and change the option
to
No
.
3 If required, repeat step 2 for other thrusters.
4 Press the Enter button.
• The selected thrusters are disabled.
5 Close the Thruster Enable input dialog.
Selecting the thruster allocation mode
Thruster allocation can be performed in many different ways. The functions that are
available for the vessel can be selected using the General Setup input dialog (see
General
Setup on page 41).
385585/C
95