Kongsberg cJoy OT, Руководство оператора

Страница: 16 / 208

Kongsberg cJoy OT
On the grey standard version the button text or symbol is colour-coded to indicate the
button type as follows:
• White text or symbol on a dark background.
Single-press action button for test, set-up, data input and operation monitoring.
• Dark text on a white background.
Double-press action button for operation control.
• Dark text on an orange background.
Single-press action button for the message system.
Controls and indicators
The controls and indicators on the operator terminal are divided into the following
functional groups.
Panel buttons and indicators
power
operation
Test Dim
This group comprises three buttons and two indicators.
• The
Test
button enables and terminates the panel test function
(see Panel test on page 73).
• The Dim button enables and terminates the panel dimming
function (see Panel dimming on page 74).
• The green
power
indicator is lit when the operator terminal is
connected to a junction box and its 24 VDC power supply is
switched on.
• The green/red
operation
indicator shows the current
operational status of the operator terminal:
– Steady green The electronics inside the operator terminal
are functioning correctly and communication with the
system has been established.
– Flashing red An internal error has been detected or the
terminal has lost communication with the system.
–
Flashing green
A test or setup function is active, i.e. panel
test, panel dimming or joystick calibration.
• The reset button (located under the hole below the operation
indicator) allows you to reset the panel microprocessor.
16
385585/C