Kongsberg cJoy OT, Руководство оператора

Страница: 56 / 208

Kongsberg cJoy OT
Note
Numeric values do not cycle. When the upper or lower end of the range is reached, the
other arrow button must be used to increase or decrease the value.
Saving changed values and options
To save any changed parameter values and options, press the
Enter
button.
The changed parameter values and options are saved and the asterisk (
*
) at the end of
each changed field name is removed. However, this action does not close the input dialog.
Discarding changed values and options
To discard any changed parameter values and options, and close an input dialog, press
the
Cancel button.
Closing input dialogs
A displayed input dialog can be closed by:
• Pressing the Cancel button.
• Pressing the same button that was used to open it.
• Opening and displaying a different input dialog.
• Opening and displaying an operational view.
• Changing the system main mode.
If the Enter button has not been pressed, prior to performing one of the above, the input
dialog will be closed and all changes discarded.
System status views and input dialogs
The system status views and input dialogs present information about the system
hardware and software. In addition the dialogs provide facilities for setting the system
date and time, selecting engineering units, updating the software, and stopping and
restarting the hardware.
View and dialog selection
System status views and input dialog are selected and cyclically displayed in the View
area of the display by pressing the
System button one or more times until the required
view or dialog is displayed.
The sequence in which the views and input dialog are displayed is as follows:
• Equipment view
• System Setup input dialog
• Software Upgrade and Restart input dialog
56
385585/C