Kongsberg cJoy OT, Руководство оператора

Страница: 29 / 208

User interface
Graphical display of the vessel with thruster and main propulsion
unit symbols in accordance with the vessel's thruster and propulsion
configuration together with a thrust force symbol (in the centre) that
shows the resulting thrust and turning forces.
Each thruster and main propulsion unit symbol contains a blue vector
that shows the thrust force and its direction relative to the surge and
sway axes of the vessel.
The direction and magnitude of the resulting thrust force is
represented by a straight blue line whereas the resulting turning force
is represented by a blue bar.
If a thruster and main propulsion unit is not running or is not ready, its
symbol is disabled (the symbol changes to grey).
The colour of the force vectors changes to yellow when the thrusters
pass the warning limit for percentage of available thrust (typically
80%). This applies only in some modes (depending on your system
configuration, but usually auto modes).
If the thrust force for a thruster or main propulsion unit exceeds 80%,
the vector changes to red.
The order heading indicator shows the value of the heading setpoint
(in degrees) when automatic heading control is selected, i.e. the yaw
axis is under automatic control.
This information is not shown in Joystick mode when automatic
heading control is not selected.
If automatic heading control is not selected in the optional Autopilot
mode the
Order heading
field shows
- - - - - - - -
.
The direction and value of the athwartships speed at the bow of the
vessel, green arrow to starboard, pink arrow to port.
The direction and value of the alongships and athwartships speed at
the centre of the vessel, green arrow forward, pink arrow reverse.
The direction and value of the athwartships speed at the aft of the
vessel, green arrow to starboard, pink arrow to port.
385585/C
29