Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 43 / 458

SAFETY PRECAUTIONS FOR OPERATION
2–25
PRECAUTIONS FOR OPERATION
Precautions for operation:ALL-1140-001A00A
PRECAUTIONS FOR JOBSITE
Precautions for jobsite:PC-0000-001K08A
INVESTIGATE AND CONFIRM JOBSITE CONDITIONS
Investigate and confirm jobsite conditions:ALL-0000-17RK00A
On the jobsite, there are various hidden dangers that may lead to personal injury or death. Before starting opera-
tions, always check the following to confirm that there is no danger on the jobsite.
q
When carrying out operations near combustible materials such as thatched roofs, dry leaves or dry grass,
there is a hazard of fire, so be careful when operating.
q
Check the terrain and condition of the ground at the worksite, and determine the safest method of operation.
Do not operate where there is a hazard of landslides or falling rocks.
q
If water lines, gas lines, or high-voltage electrical lines may
be buried under the worksite, contact each utility and iden-
tify their locations. Be careful not to sever or damage any of
these lines.
q
Take necessary measures to prevent any unauthorized per-
son from entering the operating area.
q
In particular, if you need to operate on a road, protect
pedestrian and cars by designating a person for worksite
traffic duty or by installing fences around the worksite.
q
When travelling or operating in water or on soft ground,
check the water depth, speed of the current, bedrock, and
shape of the ground beforehand and avoid any place that
will obstruct travel.
WORK ON LOOSE GROUND
Work on loose ground:ALL-0000-17SK00A
q
Avoid travelling or operating your machine too close to the edge of cliffs, overhangs, and deep ditches. The
ground may be weak in such areas. If the ground should collapse under the weight or vibration of the machine,
there is a hazard that the machine may fall or tip over. Remember that the soil after heavy rain or blasting or
after earthquakes is weak in these areas.
q
When working on embankments or near excavated ditches, there is a hazard that the weight and vibration of
the machine will cause the soil to collapse. Before starting operations, take steps to ensure that the ground is
safe and to prevent the machine from rolling over or falling.