Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 134 / 458

EXPLANATION OF COMPONENTS OPERATION
3–64
ATTACHMENT 2 SETTING
Attachment 2 Setting:PC220_KU-PT5X-100K00A
If installing 2nd attachment line as a field kit ask distributor to change monitor setting to allow 2 attachments (as
shown below).
On machines equipped with 2 attachment lines it is possible on the attachment 2 settings menu to adjust the oil
flow in ATT mode to match the attachment installed.
CHANGING ATTACHMENT OIL FLOW SETTING
1. When attachment 2 is set, the oil flow in ATT mode screen
shows as the drawing on the right.Select the oil flow setting
to be changed and press switch F2.
(a): Oil flow in attachment 1
(b): Oil flow in attachment 2
2. The attachment oil flow setting screen is displayed.
On the attachment oil flow setting screen, it is possible to
carry out the following operations with switches F1 to F6.
F1:Switches the display from attachment 2 oil flow setting
screen to attachment 1 oil flow setting screen.
F2: Switches the display from attachment 1 oil flow setting
screen to attachment 2 oil flow setting screen.
F3: Decreases the flow by 1 scale.
F4: Increases the flow by 1 scale.
F5: Returns to the attachment setting screen without
changing the oil flow.
F6: Accepts the oil flow setting and returns to the attachment
setting screen.
(X): Present oil flow setting
(Y): Min. adjusted oil flow
(Z): Max. adjusted oil flow
q
The guidance icon "ATT2" (c) is displayed on the attach-
ment 1 oil flow setting screen, and the guidance icon
"ATT1" (d) is displayed on the attachment 2 oil flow set-
ting screen.
q
It is not possible to change the oil flow for "No Attach-
ment" setting.
KDPF REGENERATION
KDPF REGENERATION:PC-Q1C8-100K00A
Each item of this menu (c) is to make settings for the KDPF
regeneration.
For details of the KDPF regeneration, see "Handling KDPF (3-
129)".