Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 167 / 458

OPERATION EXPLANATION OF COMPONENTS
3–97
WHEN CLOSING (NORMAL CASE: INTERMEDIATE LOCK POSITION)
1. While holding handle (D) to support the hood, push stay (E)
in the direction of the arrow and take it off from intermediate
LOCK position (1). Check that stay (E) is set in guide
groove (4), and then lower the engine hood.
REMARK
q
Do not lower the engine hood forcibly while stay (E) is not
set in guide groove (4). If you do so, stay (E) may be
deformed.
q
Do not release handle (D) until the engine hood is lowered
fully.
2. Lower the engine hood, hitch rings (B) of right and left
levers (A) to hooks (C), and pull up levers (A) and lock
them.
REMARK
q
To close the engine hood from the full open position, hold
grip (D) to support the engine hood, and pull stay (E) in the
direction of the arrow. Check that stay (E) has come off full
open LOCK position (2) and is set in guide groove (5), and
then lower the engine hood. When the engine hood is low-
ered, it stops at intermediate LOCK position (1). Then,
close and lock the engine hood according to closing Steps 1
and 2 described above.