Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 52 / 458

SAFETY MACHINE OPERATION SAFETY
2–34
WHEN OPERATING ON SLOPES
When operating on slopes:PC-0000-188K01A
q
When working on slopes, there is a hazard that the machine may lose its balance and turn over when the
swing or work equipment are operated. This may lead to serious injury or property damage, so always provide
a stable place when carrying out these operations, and operate carefully.
q
Do not swing the work equipment from the uphill side to the
downhill side when the bucket is loaded. This operation is
dangerous, and may cause the machine to tip over.
q
If the machine has to be used on a slope, pile the soil to
make a platform (A) that will keep the machine as horizontal
as possible.
q
Do not work on a slope covered with the steel plates. Even
with slight slopes there is a hazard that the machine may
slip.
PROHIBITED OPERATIONS
PROHIBITED OPERATIONS:PC-0000-189K00A
If the machine turns over or falls, or the ground at the working point collapses, or a structure being demolished
collapses, it may lead to serious personal injury or death. Always observe the following.
q
Never dig the work face under an overhang. There is a haz-
ard that rocks may fall or that the overhang may collapse
and fall on top of the machine.
q
Do not excavate too deeply under the front of the machine.
The ground under the machine may collapse and cause the
machine to fall.
q
To make it easier to escape if there is any problem, set the
tracks at right angles to the road shoulder or cliff with the
sprocket at the rear when carrying out operations.