Komatsu PC210-10 DEMOLITION BASE SPEC. Скачать руководство пользователя страница 260 | Manualshive

Страница: 260 / 458

Komatsu PC210-10 DEMOLITION BASE SPEC. Скачать руководство пользователя страница 260

MACHINE OPERATIONS AND CONTROLS

OPERATION

3–190

PROHIBITED OPERATIONS

Prohibited operations:PC-0000-001K15A

k

WARNING

q

Do not operate the work equipment control lever when the machine is travelling.

q

If any lever is operated when the auto-deceleration is being actuated, the engine speed will suddenly
increase, so be careful when operating.

OPERATIONS USING SWING FORCE

Operations Using Swing Force:PC-0000-189K01A

Do not use the swing force to compact soil or break objects.
This is not only dangerous, but also drastically reduces the life
of the machine.

OPERATIONS USING TRAVEL FORCE

Operations Using Travel Force:PC-0000-189K02A

Do not use the travel force to carry out excavation by digging
the bucket into the ground. This damages the machine or work
equipment.

PROHIBITION OF OPERATIONS USING HYDRAULIC CYLINDERS TO STROKE

ENDS

Prohibition of Operations Using Hydraulic Cylinders to Stroke Ends:PC-0000-189K03A

If the work equipment is used with the cylinder rod operated to
its stroke end, and given impact by some external force, the
hydraulic cylinders may be damaged, causing personal injury.
Avoid operations with the hydraulic cylinder fully retracted or
fully extended.

«
...
258
259
260
261
262
...
»

Содержание PC210-10 DEMOLITION BASE SPEC.











































































































































































































































































































































































































































































Отзывы:

Нет отзывов