Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 203 / 458

OPERATION EXPLANATION OF COMPONENTS
3–133
REMARK
After switch F6 is pressed in Step 6, the screen shown at right
may be displayed. This indicates that the operations in Steps 1
- 4 were not performed correctly or there is trouble other than
KDPF soot accumulation abnormality. Check that the engine is
running normal, the lock lever is in LOCK position (L), and the
fuel control dial is in low idle position (MIN), then repeat the
procedure from Step 6.
If the manual stationary regeneration still cannot be performed,
return to the standard screen, press switch F5 to check the
contents of other occurring troubles, stop the operation and
carry out inspection and maintenance.
REMARK
q
The explanation of the manual stationary regeneration is
displayed in 3 parts on the monitor panel. If switch F6 is
pressed, the regeneration can be started immediately,
regardless of which part is displayed. If switch F5 is
pressed, the screen returns to the standard screen.
q
If no monitor switch is operated for 30 seconds, the expla-
nation of the manual stationary regeneration disappears
and the screen returns to the standard screen. At this time,
to display the explanation of the manual stationary regener-
ation again, press switch F6 on the standard screen to dis-
play the KDPF regeneration screen.