Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 189 / 458

OPERATION EXPLANATION OF COMPONENTS
3–119
OPERATION METHOD
Antenna:PC-K861-822K00A
FREQUENCY ADJUSTMENT
Antenna:PC-K861-822K00A
1. Press band selection button (2) and select FM or AM.
2. In this condition, press the
E
button of the tuning/time adjust button (4), and the frequency becomes higher.
Also, press the
R
button, and the frequency becomes lower.
3. Keep pressing the
E
button of tuning/time adjust button (4), and the frequency becomes higher continuously.
4. Keep pressing the
R
button of tuning/time adjust button (4), and the frequency becomes lower continuously.
5. Keep pressing the
E
button and release it, and the frequency becomes higher continuously. Keep pressing
the
R
button and release it, and the frequency becomes lower continuously as an auto seek.
When a proper frequency is picked up, the tuning automatically stops.
FREQUENCY ADJUSTMENT (AUTO PRESETTING)
Antenna:PC-K861-822K00A
1. Press band selection button (2) and select FM or AM.
2. In this condition, keep pressing sound adjust button (7), and the auto presetting starts, i.e., a well-receiving fre-
quency is detected and is automatically registered in the preset memory 1 to 6.
PRESET CALL
Antenna:PC-K861-822K00A
1. Press band selection button (2) and select FM or AM.
2. In this condition, press any of buttons 1 to 6 of preset button (5), and the frequency registered to the preset
number is called to start receiving.
Example:
While a frequency is displayed, press button 1 of preset station button (5), and the preset number "P-1" appears
on the display.
The preset number is shown for 0.5 seconds, and then the frequency is displayed.
PRESET MEMORY
Antenna:PC-K861-822K00A
While the radio is receiving a station, keep pressing any of buttons 1 to 6 of preset button (5), and the frequency
being received now is memorized to the corresponding preset number.
Example:
While a frequency is displayed, keep pressing button 1 of preset station button (5), and the preset number "P-1"
appears on the display.
After the preset number flashes 3 times, the frequency is displayed and then memorized to the preset number "1".
SOUND ADJUSTMENT (BALANCE)
Antenna:PC-K861-822K00A
1. Press the sound adjust button (7) to turn on BAL on the display for starting sound adjustment (Balance).
2. In this condition, press the
E
button of the tuning/time adjust button (4), and the speaker output increases by
1 from R output. (R1 to R7)
3. Also, press the
R
button of the tuning/time adjust button (4), and the speaker output increases by 1 from L
output. (L1 to L7)
SOUND ADJUSTMENT (TREBLE)
Antenna:PC-K861-822K00A
1. Press the sound adjust button (7) to turn on TRE on the display for starting sound adjustment (Treble).
2. In this condition, press the
E
button of the tuning/time adjust button (4), and the treble level increases by 1.
(M 7)
3. Also, press the
R
button of the tuning/time adjust button (4), and the treble level decreases by 1. (Minimum -
7)
SOUND ADJUSTMENT (BASS)
Antenna:PC-K861-822K00A
1. Press the sound adjust button (7) to turn on BAS on the display for starting sound adjustment (Bass).
2. In this condition, press the
E
button of the tuning/time adjust button (4), and the bass level increases by 1.
(M 7)
3. Also, press the
R
button of the tuning/time adjust button (4), and the bass level decreases by 1. (Minimum - 7)
TIME ADJUSTMENT
Antenna:PC-K861-822K00A
1. Press display selection button (6) to display the time.
2. In this condition, keep pressing display selection button (6) for starting time adjustment.
3. For the time adjustment, press display selection button (6), and the adjustment target changes from "Hour" to
"Minute".
At this time, the adjustment target flashes.