Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию, Страница: 229 / 458

OPERATION MACHINE OPERATIONS AND CONTROLS
3–159
SEAT BELT
SEAT BELT:PC-K2Q3-100K00A
k
WARNING
q
Before fitting the seat belt, check that there is no problem in the belt mount bracket or mounting belt.
If it is worn or damaged, replace it.
q
Even if no problem can be seen in the belt, replace the seat belt every 3 years from starting usage or 5
years after manufacture whichever comes sooner. The date of manufacture of the belt is shown on the
back of the belt.
q
Always wear the seat belt during operations.
q
Fit the seat belt so that it is not twisted.
REMARK
The date attached to the seat belt is the manufactured date. It is the start of the 5-year period. It is not the start of
the 3-year period of actual usage.
FASTENING AND REMOVING OF SEAT BELT
This seat belt has a wind-in device, so it is not necessary to adjust the length.
HOW TO FASTEN SEAT BELT
Hold grip (2) and pull the belt out from wind-in device (1), check
that the belt is not twisted, then insert tongue (3) into buckle (4)
securely.
When doing this, pull the belt lightly to check that it is properly
locked.
HOW TO REMOVE SEAT BELT
Press button (5) in buckle (4), and remove tongue (3) from buckle (4).
The belt is automatically wound in, hold grip (2) and return the belt slowly to wind-in device (1).