Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию

Страница: 108 / 458

EXPLANATION OF COMPONENTS OPERATION
3–38
q
For machines ready for attachment, the attachment mode is
added to the display.
For details of the method for handling machines ready for
attachment, see the ATTACHMENTS AND OPTIONS
Section.
q
When the monitor starts up, if the working mode setting is B
mode, the confirmation message on the right is displayed
and the buzzer sounds.
q
When starting up and staying in B mode, always press func-
tion switch F6 (Yes).
If you press F5 (No), the system starts up in E mode.
q
If you want to have automatic setting of the P, E, L, B, ATT/P or ATT/E mode when starting (optional default
setting), please ask your Komatsu distributor to change the setting.
PROCEDURE FOR OPERATION
1. If working mode selector switch (2) is pressed, the Working
Mode screen is displayed on the monitor.
2. Press function switches F3 or F4 at the bottom of the
screen or working mode selector switch (2) to change the
mode selection one at a time.
q
If no switch is touched for more than 5 seconds, the
selected working mode is automatically set as the work-
ing mode and the screen changes to the one for Steps 3
and 4.
REMARK
To return to the standard screen without changing the working
mode, press function switch F5.
3. After selecting the desired mode, press function switch F6
and the mode is displayed in the centre of the monitor dis-
play.
(Example: When the power mode is selected: P)
4. After 2 seconds, the pilot monitor display at the top right of
the screen is highlighted in yellow.