Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию, Страница: 326 / 458

MAINTENANCE SCHEDULE TABLE MAINTENANCE
4–16
NOTICE
q
The inner element must not be cleaned and used again.
When replacing the outer element, replace the inner
element at the same time.
q
If the inner element is not installed properly and the
outer element and cover are installed, there is a danger
that the outer element is damaged.
q
The sealing portion of the imitation part lacks preci-
sion, and allows the entry of dust, which leads to dam-
age of the engine. Do not use such imitation part.
6. Remove inner element (6), then quickly install the new inner
element.
Install the inner element securely so that it does not move.
7. Push new outer element (5) in straight with your hand into
the air cleaner body.
If the element is held and rocked up and down lightly and to
the right and left while pushing it in, the element can be
inserted easily.
NOTICE
Be sure to install the air cleaner element facing in the cor-
rect direction. Install so that the bottom of the air cleaner
element (face where no hole is drilled) (B), (C) comes to
cover (3) end. If it is installed in wrong direction, it may
cause breakage of the air cleaner element or serious dam-
age to the engine.
8. Replace O-ring (8) of cover (3) with a new one.