Komatsu PC210-10 DEMOLITION BASE SPEC., Руководство по эксплуатации и техническому обслуживанию, Страница: 225 / 458

OPERATION MACHINE OPERATIONS AND CONTROLS
3–155
The specified positions of the mirror and the stay are as fol-
lows:
q
Stay (1)
Mounting position (2): 77mm
Mounting angle (3): 89deg.
Mounting angle (4): 107 deg.
Tightening torque of mounting bolt (5): 15.0 to 19.6 Nm {1.52
to 2 kgm}
q
Mirror (6)
Tightening torque of mounting bolt (7): 6.0 to 7.0 Nm {0.61
to 0.71 kgm}
Mounting position (8): 89mm
NOTICE
q
Tighten the right and left bolts of each bracket alter-
nately so that their right and left clearances (R) and (L)
become equal.
q
If the mirror and stay mounting bolts are tightened
excessively, the bracket may be damaged. Be sure to
tighten bolts with the specified torque.
MIRROR (B)
Adjust the mirror by hand so that it is possible to see people at
the rear right of the machine.
q
Adjust the mirror so that the side of the machine is reflected
on the mirror as shown in the drawing on the right.