Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 79 / 311

2.5.6 DOZER CONTROL LEVER
The dozer can be operated by using the dozer
(1)control lever on the right side of the operator's
seat.
Dozer control lever (1) returns to
the neutral position if it is released and the dozer
can be kept at the same position at that time.
1
C B
B
A
A
Dozer Operation
Operation Movement
Push the lever (A) Dozer blade down
Pull the lever (B) Dozer blade up
Neutral (C) Hold
Precautions for Dozer Operation
This dozer is dedicated to a hydraulic excavator.
Comply with the following precautions and be careful to handle it.
1. This dozer is designed for simple dozing operation. Do not use it for extreme digging.
It could cause damage on the dozer as well as the travel system.
2. Do not apply concentrated or offset load on the dozer. Be sure to avoid collisions during traveling
because they can damage the dozer and travel system.
3. When using this dozer to lift up the machine, make sure that the supporting ground is strong
enough.
Such operation may increase the ground contact pressure locally to weaken the ground. Be sure to
ground the dozer bottom evenly, avoiding offset or concentrated load.
4. If you perform digging at the dozer size (or front side), the bucket may interfere with the dozer. Be
careful in that case.
•Do not touch the lever unless you perform the dozer operation. Touching it accidentally may cause
severe personal injury.
•If you stop the engine with the dozer raised and then push the dozer control lever, the dozer will
fall.
[ 2. MACHINE FAMILIARIZATION ]
2
2- 17
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]