Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 210 / 311

6. Take out suction strainer (4).
7. Clean the strainer with light oil or cleaning
solvent, dry it and check it for damage. If
damaged, replace the strainer with a new
one.
L
= 537.5 to 539.5 mm (21.16 to 21.24 inch)
8. Check O-rings (5) and (6) on the bottom of
the strainer, and if wear or damage is found,
replace it with a new one.
9. Install strainer (4) by inserting it.
10. Install cover (3) with bolt (2).
Tightening torque:
20.7 to 25.3 N
･ m (15.3 to 18.7 lbf ･ ft)
11. Start the engine, run it at low idling for
several (5 to 7) minutes. After that, operate
each cylinder and swing the machine to
return it to the hydraulic oil inspection
position. Stop the engine and check the oil
level, and if it is low, refill the hydraulic oil.
6
L
1
2
3
4
5
[ 4. MAINTENANCE ]
4- 68
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]