Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 165 / 311

INSTALLING BUCKET
1. Clean each pin and pin bore and grease
sufficiently.
2. Move the bucket cylinder to align the pin
bores of bucket (6) and bucket link (8) with
each other, and then insert pin (4).
3. Raise the boom and slightly raise the bucket
from the ground.
4. Move arm (7) to align the pin bores of
bucket (6) and arm (7) with each other, and
then insert pin (5).
5. Insert pin (3) and install retaining ring (2).
Fit O-ring (1) in place.
6. Apply grease to the grease nipples for each
pin until the grease comes out through the
gap between pins and bore.
7
5
6 6
4
8
B
B
B-B
2
3
1
If O-ring (1) is cracked or has lost elasticity, replace it with a new one.
[ 4. MAINTENANCE ]
4
4- 25
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]