Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 196 / 311

4.14.5 GREASING SWING BEARING
Do not swing the machine while greasing the swing bearing.
Inject grease until the old grease is pushed out
from the sealing surface of the swing bearing for
each of four directions while swinging the
machine by 90 degrees. The greasing point is
one (grease nipple).
4.14.6 GREASING DOZER
ATTENTION TO GREASING
•For the digging work in the water, grease the submerged parts before and after the work every day.
•Grease the attachment before the work if it has not been used for one month or longer.
1. Set the attachment in the greasing position
and then stop the engine.
2. Before greasing, wipe off the grease nipples.
Replace any damaged nipples with new
ones.
3. Use the grease gun to apply grease to the
grease nipples.
4. After applying grease, wipe off old grease
which is pushed out.
1
2
3
No. Parts to grease Points No. Parts to grease Points
1 Dozer cylinder foot pin 1 3 Dozer foot pin 2
2 Dozer cylinder rod pin 1
[ 4. MAINTENANCE ]
4- 54
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]