4. Be careful not to damage the rubber track
shoes with the bucket during the work.
5. Do not operate the machine while rubbing
the rubber track shoes against a concrete
block or wall.
6. Slowly lower the machine which was raised
using the attachment.
7. Work in a salty or corrosive environment
affects the adhesive applied to core metal.
Avoid such locations or wash the rubber
track shoes after use.
8. Use the rubber track shoes at a temperature
between -25 to
+
55 degrees C because of
physical properties of rubber.
Use the rubber track shoes with a proper tension to prevent them from coming off. If the tension is
loose, it causes coming off of rubber track shoes under the conditions below. Use extreme caution
during the operation even when the tension is proper.
9. Do not turn on an uneven surface (about 20
cm) such as curbs or rocks. To travel across
an uneven surface, go over it in the right
angle.
10. While climbing a slope in reverse, do not
turn at the point of moving from the flat
ground to the slope.
[
3. MACHINE OPERATION
]
3
3-
43
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]
Содержание SK55SRX-6
Страница 2: ...Copyright 2019 Kobelco Construction Machinery Co Ltd All rights reserved S2PS00017ZE08 1226CsCshWbYs...
Страница 10: ...CONTENTS 8 Copyright 2019 Kobelco Construction Machinery Co Ltd All rights reserved S2PS00017ZE08 1226CsCshWbYs...
Страница 142: ...4 MAINTENANCE 4 2 Copyright 2019 Kobelco Construction Machinery Co Ltd All rights reserved S2PS00017ZE08 1226CsCshWbYs...