Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 289 / 311

8.5 ANGLE DOZER
8.5.1 ANGLE DOZER OPERATION
A. Outline of operation
The dozer blade can be moved up and down and changed to the angling with only one lever. And the
angling of dozer blade can be operated by pressing the angle switch located on the grip to turn ON.
B. Blade operation
The dozer blade is operated with dozer control lever (1) which is located on the side of the right
control stand as shown in the right figure.
Release the dozer blade control lever, and the lever returns to the neutral position. And the dozer
blade is held the as position as it is.
• Lever control
The dozer control lever (1) is usually used to
control the raise and lower of the blade in back
and forth, and used to control the angling of the
blade in right and left.
Lever operating
direction
Forward
Backward
Press button and
push lever to right
Press button and
pull lever to left
Center
Operation
Variable speed for lowering blade.
Variable speed for raising blade.
Right side of blade comes to near side.
Left side of blade comes to near side.
Hold position.
2
1
• Angling Switch Control
Turn angle switch (2) on the lever "ON", and the
lever operation RH or LH is available for angle
control.
Angle switch (is "OFF" under normal condition)
･ Switch ON: Angling is actuated.
(Keep pressing the switch during angling.)
ANGLE IN LH ANGLE IN RH
[ 8. OPTIONAL EQUIPMENT ]
8
8- 35
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]