Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 188 / 311

Loosening Track Shoe Tension
•It is very dangerous to discharge the grease by using procedures other than the one described
below.
•If the grease does not come out and the track shoe tension is not loosened after loosening the
grease nipple, contact our authorized dealer/distributor near you for repair.
•Never disassemble the grease nipples. It is dangerous.
1
A
1
Details of A Section (Grease Discharge)
1. Loosen grease nipple (1) of the grease cylinder gradually to drain the grease. Do not loosen
grease nipple (1) more than one turn.
2. If the grease does not come out well, move the machine (track shoe) forward and backward.
3. Tighten grease nipple (1).
Tightening Torque: 58.8 to 88.2 N ･ m (43.4 to 65.0 lbf ･ ft)
In order to check that the tensions is proper, travel the machine forward and backward. Check the
track shoes tension again, and repeat the adjustment for a proper tension as needed.
4.13.4 GREASING SWING PINION
Do not swing the machine while greasing the swing pinion.
During the first 50 hours of operation of a new machine, lubricate it every 8 hours.
Inject grease of 50 g (about 20 times with grease
gun) from grease nipple (1) of the swing pinion
for each of four directions while swinging the
machine by 90 degrees.
1
[ 4. MAINTENANCE ]
4- 48
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]