Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 55 / 311

VENTILATION PRECAUTIONS
Inspecting and maintaining the machine indoor or in a place with poor ventilation may cause gas
poisoning. Ventilate the working site fully, especially when handling exhaust gas, fuel, cleaning solvent
or paint.
・ Adequate ventilation is needed when
inspecting, maintaining or running the
machine indoor.
・ Extend the exhaust pipe to the outdoor and
open the doors and windows to let enough
fresh air in. Provide a ventilating fan if
necessary.
DETACHING, INSTALLING AND STORING THE EQUIPMENT/ATTACHMENTS
・ Designate the supervisor and follow his/her
instruction to detach and install the
equipment/attachment.
・ An attachment in danger of falling should be
supported stably not to fall during storage.
Entry into the stored area of unauthorized
personnel should be prohibited.
INSPECTION & MAINTENANCE IN HIGH PLACES
Do not get close to the edge to avoid falling.
・ Put things in order around steps before
inspection and maintenance in a high place.
•Avoid spillage of any oil or grease
•Avoid scattering tools
•Avoid slipping
・ Never jump on or off the machine.
When getting on and off the machine, do not
fail to use a ladder, step and hand rail, and
support the body with the hands and feet.
・ Use protective gears such as safety belt as
needed.
DO NOT DROP TOOLS AND PARTS
Dropping of any tools or parts in the working site may cause damage to the machine or unexpected
machine motion which may result in personal injury. When inspecting the machine with the access
panel or fuel inlet opened, do not drop tools and parts into the inside.
Be sure to pick them up immediately in case they are dropped.
[ 1. SAFETY PRECAUTIONS ]
1
1- 37
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]