Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 57 / 311

PAYING ATTENTION TO BROKEN PIECES WHEN HAMMERING
When hammering, popping up pins or flying metal chips may cause severe personal injury. Strictly
follow the instructions below.
・ A flying metal piece may cause severe
personal injury when hammering a hard metal
part such as pin, edge, tooth and bearing.
Wear protective gears such as protective
glasses, gloves, hard hat and protective
shoes to avoid injury.
・ When hammering a pin, tooth or other, a
flying metal piece or others may cause injury.
Confirm no one is around the working site
before hammering.
1.8.3 PROHIBITED IN INSPECTION & MAINTENANCE
DO NOT HEAT NEAR THE HYDRAULIC EQUIPMENT NOR PIPING
Do not heat the sections close to the tubes and hoses with pressurized oil when welding, soldering and
using a torch. It may cause generation of flammable steam or gas and result in a fire or severe burns.
・ Do not heat the section close to the tube
and hose contained pressurized oil or other
flammable items by welding, soldering and
torch.
・ If the pressurized tube and hose is heated
directly, they may be suddenly cut. When
carrying out the welding and soldering works,
cover the tube, hose and other flammable
items with fire-proofed covers.
DO NOT HEAT PIPING CONTAINING FLAMMABLE OIL
・ Do not employ gas cutting for the pipes and tubes containing flammable oil.
・ Wash flammable oil completely with nonflammable solvent before welding and gas cutting.
MODIFICATION IS PROHIBITED
・ Personal injury or failures of the machine
caused by unspecified modification voids our
liability for the machine.
・ Consult our authorized dealer/distributor for
any modification to the machine beforehand.
[ 1. SAFETY PRECAUTIONS ]
1
1- 39
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]