Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 164 / 311

4.11.3 REPLACING BUCKET
･ Park the machine on the level and firm ground. When working in team, surely send and receive
signals to each other and use extreme caution to ensure the safety.
･ An abrupt operation of the front attachment is strictly prohibited because it may cause danger.
･ When aligning the pin with a pin bore, never insert your fingers into the bore.
･ Place the removed bucket in the stable condition.
REMOVING BUCKET
1. Put the bucket bottom on the level ground
and stabilize it at the position where the load
is not applied on the pins of bucket and arm.
2. Move O-rings (1) from the specified position
to the bucket boss.
3. Remove retaining ring (1) by using a
flat-head screwdriver, remove pin (3), pull
pins (4) and (5) out, and then remove bucket
(6).
A
A
7
8
6
1
9
9
2
5
3
2 4 3
A-A
•Use caution to prevent sand or mud from attaching the removed pin.
•The both ends of arm (7) and bucket link (8) have the dust seals (9). Use caution to avoid damaging
them.
[ 4. MAINTENANCE ]
4- 24
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]