Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 106 / 311

3.4.3 USING BOOSTER CABLES
Observe the following precautions when using booster cables to start a disabled machine.
USING BOOSTER CABLES
･ Flammable gas (hydrogen gas) is generated in the battery. Do not allow sparks or flames to come in
contact with the battery to avoid triggering an explosion.
･ Do not allow the boost machine to come in contact with the disabled one.
･ Wear protective glasses and rubber gloves when using booster cables to start the engine.
･ Do not allow the booster cable clips to come in contact with each other once connected to a
battery.
･ Do not mistake positive ( + ) for negative (-) in the booster cable connection. The negative cable,
when finally connected to the engine body (hook, etc.) of the disabled machine, may arc causing
sparks. Connect the booster cable to a ground surface as far as possible from the battery.
･ If the battery electrolyte is frozen, do not attempt to start the the engine with another power supply.
1
2
1. Battery
2. Bolt
･ Use the battery of which the capacity is equivalent to that of the disabled machine for the boost
machine.
･ Select the suitable size for the booster cables and clips according to battery size.
･ Do not use booster cables that are damaged, i.e., broken insulation, damaged clamps or damaged
by corrosion.
･ Connect the clip securely.
･ Check that the pilot control shut-off lever is in the "LOCKED" position.
･ Check that each control lever is returned to the neutral position.
･ The starter switches on both boost and disabled machines must be held in "OFF" condition. When
the power was connected, it may cause unexpected move of machines and cause accident.
[ 3. MACHINE OPERATION ]
3- 14
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]