Kobelco SK55SRX-6, Руководство по эксплуатации

Страница: 53 / 311

1.8 PRECAUTIONS OF INSPECTION & MAINTENANCE
1.8.1 BEFORE INSPECTION & MAINTENANCE
READ CAREFULLY OPERATION/MAINTENANCE PROCEDURES
Improper maintenance may cause not only personal injury (being caught or burned) but also damage to
the machine.
Fully read and understand the maintenance procedures (preparation for safety work, tools, qualifications,
important parts, designation of the supervisor and wearing of the protective gears, etc.) described in this
manual before inspecting and maintaining the machine. And then safely and carefully perform the
inspection and maintenance.
CONFIRM THE JOB PROCEDURES
Confirm all working procedures before starting work to prevent accidents caused by lack of the
understanding of procedures. If the signal person is placed, fully confirm the signal person and the
signals.
ORGANIZE AND CLEAN UP THE WORKING SITE
Inspecting and maintaining the machine at a messy working site may cause personnel to fall down or
personal injury by debris.
Remove obstacles, grease, oil, paint, debris, etc., from the working site and put things in order to clean
up the area for safety work.
PUT THE TAGS "DO NOT START ENGINE!", "DO NOT OPERATE" AND "UNDER
INSPECTION/MAINTENANCE"
If unauthorized personnel start the engine or
touch control levers without care during the
inspection and maintenance, it may cause severe
personal injury. Put the tags "DO NOT START
ENGINE!","DO NOT OPERATE" or "UNDER
INSPECTION/MAINTENANCE" on noticeable
places or where people can easily notice such as
around the operator's seat before performing the
inspection and maintenance. If necessary, display
tags around the machine.
USE PROPER TOOLS
Use of damaged or deformed tools for the purpose other than its original intention may cause personal
injury. Use properly calibrated and maintained tools.
[ 1. SAFETY PRECAUTIONS ]
1
1- 35
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]