•When the pilot control shut-off lever is set to the "LOCKED" position, the attachment, swing motor
and dozer do not work.
•The pilot control shut-off lever is installed only on the left side.
2.5.3 CONTROL LEVER
CONTROL OF LEVERS
-Before operation, be sure to pay attention to the safety of the surroundings and operate each lever
slowly to fully make sure that the machine movement is in accordance with the control pattern
indicated on the control pattern label.
-If you operate the machine while the control pattern label does not match the actual machine
movement, it may cause severe personal injury.
-When the label does not match the actual machine movement, replace them with a proper one.
-When stopping swing operation, stop it earlier than your intended position by taking the swing
distance after returning the swing lever to the neutral position into account.
-The operations of boom, arm, bucket, swinging, and traveling by this machine conform to the ISO
lever pattern.
As for operation methods of other operational control devices, refer and check other paragraphs in
this manual.
-Even if the lever pattern of your machine can be changed, the following explanations for the
operations of the boom, arm, bucket, and swinging are based on the ISO standard operation method.
These two levers activate operations as illustrated
in the right. Release the hands to return the
levers to the neutral positions and stop the
attachment moving. It is possible to perform
various operations at the same time.
ISO Pattern
•Left control lever
(1)Swing right
(2)Swing left
(3)Arm out
(4)Arm in
N (Neutral): Upper structure and arm are held in
the position where they are.
•Right control lever
(5)Boom down
(6)Boom up
(7)Bucket in
(8)Bucket out
N (Neutral): Boom and bucket are held in the
position where they are.
(3)
(3)
(4)
(4)
(2)
(2)
(1)
(1)
(5)
(5)
(6)
(6)
(7)
(7)
(8)
(8)
[
2. MACHINE FAMILIARIZATION
]
2-
14
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]
Содержание SK55SRX-6
Страница 2: ...Copyright 2019 Kobelco Construction Machinery Co Ltd All rights reserved S2PS00017ZE08 1226CsCshWbYs...
Страница 10: ...CONTENTS 8 Copyright 2019 Kobelco Construction Machinery Co Ltd All rights reserved S2PS00017ZE08 1226CsCshWbYs...
Страница 142: ...4 MAINTENANCE 4 2 Copyright 2019 Kobelco Construction Machinery Co Ltd All rights reserved S2PS00017ZE08 1226CsCshWbYs...