KI WireWorks, Руководство по сборке

Страница: 8 / 48

6
WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Assembling Intersections
(continued)
2. Install height-change connector
block (if required) to the frame
using, shoulder bolts and
washers with a
3
/
16
” allen wrench
(Figure 2). Refer to the table on
next page for the correct number
of connector blocks.
Note: Height-change connector
blocks have a wire management
channel that allows cables
to be routed between two different
height panels (Detail B).
Note: Face the opening of all
height-change connector blocks
toward the shortest panel to
allow for lay-in wire management
(Detail C).